(4/5) based on 11 customer reviews
Description
7.5 Electrical Characteristics. At TA = +25 C , VS1 = VS2 = 15 V, and RL =2k , unless otherwise noted. ISO122P/U. ISO122JP /JU. TEST. PARAMETER. UNIT. Sep 10, 2014 N / A for Pkg Type. -25 to 85. ISO122JP . ISO122JU. ACTIVE. SOIC. DVA. 8. 20. Green (RoHS. & no Sb/Br). CU NIPDAU. Level-3-260C-168 HR. An isolating op-amp (Texas Instruments P/N: ISO122JP ) was used to electrically isolate all voltage measurements from the DSP. This op-amp is a unity gain May 12, 2009 An ISO122JP isolation amplifier was used to isolate voltage sensor signals from the power board to be used by the DSP. A REF3318 voltage
| Part Number | ISO122JP |
| Main Category | Integrated Circuits (ICs) |
| Sub Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Brand | Integrated Device Technology (IDT) |
| Description | IC OPAMP ISOLATION 50KHZ 16DIP |
| Series | - |
| Packaging | Tube |
| Amplifier Type | Isolation |
| Number of Circuits | 1 |
| Output Type | - |
| Slew Rate | 2 V/µs |
| Gain Bandwidth Product | - |
| -3db Bandwidth | 50kHz |
| Current - Input Bias | - |
| Voltage - Input Offset | 20mV |
| Current - Supply | 5mA |
| Current - Output / Channel | 15mA |
| Voltage - Supply, Single/Dual (±) | ±4.5 V ~ 18 V |
| Operating Temperature | -25°C ~ 85°C |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300", 7.62mm), 8 Leads |
| Supplier Device Package | 16-PDIP |
| Image |  |
Hot Offer
ISO122JP
Integrated Device Technology (IDT)
150
1.5525
WIN AND WIN ELECTRONICS LIMITED
ISO122JP
IDT (Integrated Device Technology)
9039
2.415
LIXINC Electronics Co., Limited
ISO122JP
INTEGRATE
623
3.2775
Hong Kong Taihua Weiye Trade Co., Limited
ISO122JP
INTEGRA
240
4.14
Antony Electronic Ltd.
ISO122JP
IDT, Integrated Device Technology Inc
36911
0.69
Innovation Best Electronics Technology Limited
